Clatronic AR 819 Benutzerhandbuch Seite 35

OPERATION
b) TA ALARM mode
automatic retune mode is not
activated. Only double beep sound
(ALARM) is output. So, in this mode,
the unit keeps the current station
anyhow. (The PI priority is higher
than TP.)
When newly tuned station doesn't
have TP information for 5 seconds,
beeps
information gets lost at the current
station for retune time, the beep
sound is output.
When newly tuned station has not
RDS
suppressed somewhat.
MASK: DPI/ALL
MASK DPI mode: masked only the
AF which has Different PI (DPI).
MASK ALL mode: masked the AF
which has Different PI and NO RDS
signal with high field strength.
REGION: OFF/ON
REGION ON mode: AF switching or
TA-VOLUME: Volume 18 (the default
RETUNE: LONG/SHORT
- Listening to Traffic Announcement
TA button (22) is operated as follows:
When pressed and held for several
Downloaded from www.Manualslib.com
When this mode is selected, any
come out.
signal, "PI
PI SEEK is implemented to the
station which have all PI codes are
the same as current station.
REGION OFF mode: The regional
code in the format of PI code is
ignored when AF switching or PI
SEEK is implemented.
TA volume value is 18, you can
adjust it from 0 to 40).
When PI information gets lost at
the current station for retune time
which is set by RETUNE SHORT
(30 sec.) or RETUNE LONG (90
sec.), the radio start to retune to
next same PI station.
manuals search engine
seconds, it is engaging whether TA
mode on or off.
When TA mode, is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3) mode
or AUX IN mode or IPOD mode, it will
switch temporarily to radio mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program.
If the volume level was under the
When TP
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min. TA volume
level), it will be set to the last level.
SEEK" is
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast
expressed
characters
AF: Alternative Frequencies
Frequency
stations
program
TP: Traffic Program Identification
Identification
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not
34
station name data
in alphanumerically
list of broadcasting
transmitting the same
data for traffic