Troubleshooting; Cleaning - Silvercrest SSRM 20 A1 Bedienungsanleitung

Troubleshooting

No sound/no signal
♦ Check whether the earphones
into the socket
♦ Check whether the volume is set to the minimum level (
♦ Move to a different location to see if the signal improves .
The display is not working
♦ Check whether the batteries are depleted or inserted
incorrectly .
NOTE
► If you cannot solve the problem with the above-men-
tioned solutions, please contact the Service Hotline
(see section Service) .

Cleaning

CAUTION
► To avoid irreparable damage to the device, ensure that
no moisture gets into it during cleaning .
► Do not use caustic, abrasive or solvent-based cleaning
materials . These can damage the surfaces of the device .
♦ Clean the surfaces of the device with a soft, dry cloth .
For stubborn dirt, use a slightly damp cloth with a mild
detergent .
SSRM 20 A1
are properly plugged
.
GB │ IE │ NI
) .
│
19 ■