Activating/Deactivating Alarm Functions; Snooze Function - Silvercrest SSRM 20 A1 Bedienungsanleitung

Press the MODE /
♦
The minutes flash on the display
♦ Press "‒"
♦ Press the MODE /
The display
( or
Proceed as described above to set the second alarm .

Activating/deactivating alarm functions

♦ While the device is switched off, press the MEM/AL but-
ton repeatedly until the right symbol (
the corresponding alarm time appear on the display
The alarm function is now active .
At the set time, the buzzer on the radio will go off for approx-
imately 1 minute . Afterwards, the alarm will remain silent for
one minute . During this silent period, the corresponding sym-
bol ( or
repeats for one hour or until the alarm is switched off .
♦ Press the
have to reactivate the alarm function . The alarm signal will
automatically sound again at the set time on the next day .

Snooze function

While the alarm is going off, press the MODE/
♦
to activate the snooze function . The alarm signal is
interrupted for 5 minutes . On the display
sponding symbol (
symbol for the snooze function .
■ 18 │ GB │ IE │ NI
button
or "+" to set the required value .
button
shows the current time again . The symbol
) shows you which alarm is active .
) will flash on the display
button to switch the alarm off . You do not
or
to save your settings .
.
to save your settings .
. This sequence
) will flash next to the
SSRM 20 A1
or ) and
.
button
, the corre-