Sleep Timer; Setting Alarm Times - Silvercrest SSRM 20 A1 Bedienungsanleitung

Sleep timer

The sleep timer allows you to set a time between 10 and
90 minutes, after which the radio automatically switches off .
The time is set in 10-minute increments .
♦ While the device is switched off, press and hold the
button
number
♦ Press the
the number of minutes you wish to set . The radio will
switch off automatically after the set time has lapsed .
♦ Press the
timer and switch the radio off directly .

Setting alarm times

You can set two different alarm times . Make sure that the
time settings of the device are correct . You can only program
alarm times while the device is switched off .
♦ Press the
♦ While the device is switched off, briefly press the
MEM/AL button
for the first alarm time . Press the MEM/AL button
again . The
time .
♦ Select alarm time 1 or alarm time 2 and briefly press the
MODE /
flash on the display
♦ Press "‒"
SSRM 20 A1
until the display
.
button repeatedly until you have reached
button briefly to delete the activated sleep
button briefly to switch off the radio .
. The display
symbol appears for the second alarm
button . The hours of the selected alarm
.
or "+" to set the required value .
reads SLEEP and the
shows the symbol
GB │ IE │ NI │
17 ■