Cleaning The Spray Arms; External Cleaning; Internal Cleaning; Troubleshooting - AEG FAVORIT 55522WO Benutzerinformation

34 www.aeg.com

12. TROUBLESHOOTING

Downloaded from www.Manualslib.com
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
If the appliance does not start or it stops
during operation. Before you contact an
Authorised Service Centre, check if you
manuals search engine
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.

11.2 Cleaning the spray arms

Do not remove the spray arms. If the
holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.

11.3 External cleaning

• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.

11.4 Internal cleaning

If you regularly use short duration
programmes, these can leave deposits of
grease and limescale inside the
appliance. To prevent this, we
recommend to run long duration
programmes at least 2 times per month.
can solve the problem by yourself with
the help of the information in the table.