What To Do If The Appliance Is Not In Programme Selection Mode - AEG FAVORIT 55522WO Benutzerinformation

• The activation of the rinse aid
What to do if the appliance is
not in programme selection
mode
The appliance is in programme selection
mode when the programme indicator
programme duration.
Press and hold simultaneously Program
and Option until the appliance is in
programme selection mode.
47 -50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting
2) Do not use salt at this level.
How to set the water softener
level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
Downloaded from www.Manualslib.com
dispenser when you want to use the
Multitab option and the rinse aid
together.
is on and the display shows the
German French
degrees degrees
(°dH) (°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
hold simultaneously Delay and Start
until the indicators
manuals search engine
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a detrimental effect on the washing
results and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
mmol/l
8.4 - 9.0
7.6 - 8.3
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
<0.7
and the display is blank.
2. Press Program.
• The indicators
go off.
• The indicator
flash.
,
• The display shows the current setting:
e.g.
ENGLISH
Water softener
Clarke Level
degrees
58 - 63 10
53 - 57 9
46 - 52 8
36 - 45 7
28 - 35 6
23 - 27 1)
5
18 - 22 4
13 - 17 3
5 - 12 2
< 5
2)
1
and start to flash
and
continues to
= level 5.
27