General Considerations - Scheppach Capas 5 Originalanleitung

Manufacturer:
scheppach
Manufacture of Woodworking Machines GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Valued customer,
We hope that you enjoy your new machine and wish you
every success in working with it.
Warning:
The manufacturer of these devices is not liable, under the
applicable Product Liability Act, for damages to this device
or by this device resulting from:
• improper handling,
• noncompliance with the operating instructions,
• repairs by a third, non­authorized party
• installation and replacement of non­original spare
parts,
• utilization, noncompliant with the regulations,
• failure of the electric equipment resulting from violation
of the electric specifications and VDE (Association of
Electrotechnology) regulations 0100, DIN 57113 / VDE
0113.
We advise you:
Before assembly and implementation, please read the op-
erating instructions in their entirety.
These operating instructions should make it easier for you
to get acquainted with your machine and to use it as in-
tended.
The operating instructions contain important indications
that will help you work professionally and efficiently with
the machine, at the same time avoiding risks, saving on re-
pair costs, decreasing downtime and increasing reliability
and lifespan of the machine.
In addition to the safety regulations provided in the operat-
ing instructions, you must observe the applicable regula-
tions of your country for the use of this machine.
You should keep the operating instructions near the ma-
chine. They are protected from dirt and moisture by a plas-
tic covering. These must be read and followed diligently
by any operator, before staring the work. Only those, who
have been instructed on the use and informed of all the
associated risks, should work on the machine. Minimum
age requirements should be observed.

General Considerations

• After unpacking, please check all of the parts for any
possible damages in transit. The feeder must be imme-
diately notified of any complaints. Late claims will not
be accepted.
• Check that the shipment is complete.
• Before use, familiarize yourself with the operating in-
structions.
• Please use only original parts as supplies, such as wear
and tear and replacement parts. You can obtain replace-
ment parts from your specialized dealer.
• When ordering, please give our item number, as well as
the type and the year of manufacture of the device.
Capas 5
Complete Delivery Contains:
Crowned saw Capas 5
Operating instructions
Technical Data
Dimensions L x B x
H mm
Mounting table ø mm
Saw blade ø mm
Speed of Rotation/
min.
Bevel angle
Screen position ° 0/15/22, 5/31,6/45/60 right
0/15/22,5/31,6/45 left
Possible angle of
inclination
Weight kg
Cutting data
90°/0°
90°/45°
45°/0°
45°/45°
Power
Motor Va.c. /Hz
Intake Capacity P1 W
Production Capacity
P2 W
Subject to technical changes!
Information on the subject of noise development
The level of noise produced by this machine during its op-
eration is as follows:
Maximum noise pressure level: 95.9 dB(A)
Maximum noise performance level: 108.9 dB(A)
Maximum vibration level: 1.52 m/s
Warning: Noise can have adverse health effects. Should
the noise level increase above 85 dB(A), you must wear
ear protection. Should the electrical supply not be opti-
mal, then the current can drop for a short time when the
machine is turned on. This can influence other equipment
(for example, the blinking of a lamp). Should the electrical
capacity have a Zmax < 0.27, such disturbances are not to
be expected. (Should you have difficulties, please consult
your local dealer.)
In these operating instructions we have noted those passages
which refer to your safety with this sign: m
m General Safety Issues
WARNING! When working with electrical tools, certain basic
safety procedures must be observed in order to keep the
Bevel latch grip
Fastening vice
Dust bag
Saw blade key
Small parts
860 x 650 x 700
328
255/30 WZ Z40
4000
0°–45° left
0°–60° right
°0–45 right and left
24.3
305 x 80 mm
204 x 80 mm
305 x 42 mm
204 x 42 mm
230/50
1800
1050
2
english 13