Basic Operations - Panasonic CZ-RWSU2N Kurzanleitung

Basic Operations

Setting the Current Time
After changing the batteries and pressing the Reset button, be sure
to reset the current time.
(When the Reset button is pressed, the current time reverts to
[ ].)
1. Press for two seconds or more.
Once the clock displays starts blinking, the clock can be set.
2. Set the hour with
If you press and hold the button, the time changes quickly.
3. Set the minutes with
If you press and hold the button, the time changes quickly.
4. Pressing completes the time setting.
• While you are setting the current time, the time display fl ashes
and the colon lights up.
• If the buttons are not pressed for three minutes while setting the
current time, it is set to the displayed time.
Note
• When the Reset button is pressed, the timer settings are
canceled.
Operation
, Dry , Cool , Fan
Auto , Heat
Models that only provide the cooling function cannot operate in the
auto or heating mode.
Power: Turn on the circuit breaker beforehand, referring
to the operating instructions for the unit.
1. Press .
2. Press and select from among Auto
, Cool and Fan
and select the desired speed.
3. Press
If set to Auto , the fan speed switches automatically. (Auto
does not work in Fan mode.)
4. Press one of the
desired temperature.
Temperature settings cannot be made in Fan mode.
Auto
Heat
Dry / Cool
/ of the
/ of the
.
buttons and set the
MAX (°C) MIN (°C)
27 17
30 16
30 18
.
.
3
, Heat , Dry
2 1, 4
3
(EN)
1
4
2
7