Changing The Brightness At Both Sides Of The Screen (Side Mask); Sleep Timer; Using A Password; Entering A Password - Pioneer PDP-506FDE Bedienungsanleitung

Useful Adjustment Settings
09
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size selected
for the AV mode, you can change the brightness of the grey
side masks that appear at both sides of the screen.
1
Press HOME MENU.
2
Select "Option" ( /
3
Select "Side Mask" ( /
4
Select the desired parameter ( /

Side Mask

Fixed
Auto
Item
Fixed
(factory default)
Auto
5
Press HOME MENU to exit the menu.
NOTE
• If you select "Auto", the selection for "Drive Mode" (page 36)
becomes ineffective.
38
En
then ENTER).
then ENTER).
then ENTER).
Description
Always sets the same brightness for the grey
side masks.
Adjusts the brightness of the grey side masks
according to the brightness of images.

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.
1
Press HOME MENU.
2
Select "Sleep Timer" ( /
3
Select the desired time ( /
• You can select from among "Off" (cancel), "30 min", "60
min", "90 min", and "120 min".
4
Press HOME MENU to exit the menu.
NOTE
• Five minutes before the selected time elapses, the remaining
time appears every minute.
• To check the remaining time, perform steps 1 and 2. After
checking the time, press HOME MENU to restore the
previous display.

Using a password

The Plasma Display System provides the Child Lock function
for preventing children from watching inappropriate
programmes. You need to enter a password when watching
programmes with "Block" specified. Before the system is
shipped, "1234" is preset as the factory-default password. You
can however, change the password as you want.
When using the Home menu you select "Auto Installation",
"Analogue TV Setup", or "Password", a screen prompting
password entry appears to prevent others from changing the
programme settings at their choices.

Entering a password

In a case where you select a channel blocked with Child Lock
or password entry is requested when attempting to open the
menu, enter a password correctly.
1
Enter a correct 4-digit password using buttons 0 – 9.
Please Input Your Password.
NOTE
• If you fail password entry three times, "Invalid password."
appears, and the menu is closed. In order to display the
password entry screen again to unlock the password, select
the blocked channel or open the menu again.
• If the password entry screen disappears before entry, you
may recall it by pressing ENTER.
then ENTER).
then ENTER).