Labelling Tv Channels; Sorting Preset Tv Channels; Clock Setting - Pioneer PDP-506FDE Bedienungsanleitung

Basic Adjustment Settings

Labelling TV channels

You can name TV channels that you have set up, using up to
five characters. This may help you easily identify the channels
during selections.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4
Select "Label" ( / then ENTER).
5
Select "Programme Entry" ( / ).
6
Select a programme number ( / ).
• You can select 1 through 99.
Label
Programme Entry
Label
7
Select "Label" ( / then ENTER).
• The name entry screen appears.
8
Select the first character ( / ,
1 2 3 4 5 6
A B C D E F
K L M N O P
U V W X Y Z
& ' ( ) + -
• The cursor moves to the second character.
9
Repeat step 8 to enter up to five characters.
• To correct entered characters, select [
screen, and then press ENTER. The cursor moves to the
preceding or subsequent character.
• To delete the current character, select [Delete] on the
screen, and then press ENTER.
• To put a space for the current character, select [Space]
on the screen, and then press ENTER.
10
To complete the name entry, press
[OK] on the screen, and then press ENTER.
11
Press HOME MENU to exit the menu.
NOTE
• The above procedure transfers and sets the selected channel
information to the connected recording equipment such as
a VCR or DVD recorder.
then ENTER).
1
/ then ENTER).
7 8 9 0
G H I J
Delete
Q R S T
Space
, . : ;
* / _ @
OK
] or [ ] on the
/ or / to select

Sorting preset TV channels

Use the following procedure to change the sequence of the
preset TV programmes.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4
Select "Sort" ( / then ENTER).
• The sort screen appears.
Sort
09
01 AAAAA 10
02 BBBBB 11
03 CCCCC 12
04 DDDDD 13
05 EEEEE 14
06 FFFFF 15
07 GGGGG 16
08 HHHHH 17
5
Select a channel to be shifted ( / ,
6
Select a new location ( / ,
• Sorting is executed.
7
Press HOME MENU to exit the menu.
NOTE
• To change a page on the Sort screen in step 6, select L/M on
the screen with / to select a page, and then press ENTER.
• The above procedure transfers and sets only the shifted
channel information to recording equipment such as a VCR
or DVD recorder.

Clock setting

Use the following procedure to set the time correctly.
1
Press HOME MENU.
2
Select "Setup" ( / then ENTER).
3
Select "Analogue TV Setup" ( /
• The password entry screen appears. Enter your 4-digit
password using buttons 0 – 9.
4
Select "Clock" ( / then ENTER).
5
Select a TV channel to be used for auto clock setting ( / ).
Clock
02/07/2004 FRI 0:00
Clock Set Programme
6
Press HOME MENU to exit the menu.
NOTE
• If the system fails to set the date and time through the
selected TV channel, the "Time & Date" entry screen appears.
Set the correct, current time.
• The system obtains and displays time by adding Universal
Coordinated Time (UTC) and Local Time Offset (LTO) data
received with broadcasting signals. If the system fails to
display a correct time, check with your local broadcasting
station.
then ENTER).
1/4
IIIII 18 RRRRR
JJJJJ 19 SSSSS
KKKKK 20 TTTTT
LLLLL 21 UUUUU
MMMMM 22 VVVVV
NNNNN 23 WWWWW
OOOOO 24 XXXXX
PPPPP 25 YYYYY
QQQQQ
/ then ENTER).
/ then ENTER).
then ENTER).
1 ABCDE
08
29
En