Changing The Brightness At Both Sides Of The Screen (Side Mask); Sleep Timer; Using A Password; Entering A Password - Pioneer PDP-436RXE Bedienungsanleitung

Useful Adjustment Settings
Changing the brightness at both sides
of the screen (Side Mask)
With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can
change the brightness of the grey side masks that appear at
both sides of the screen.
1
Press HOME MENU.
2
then ENTER).
Select "Option" ( /
3
Select "Side Mask" ( /
4
Select the desired parameter ( /
Side Mask
Fixed
Auto
Item Description
Fixed Always sets the same brightness for the grey
(factory default)
side masks.
Auto Adjusts the brightness of the grey side masks
according to the brightness of images.
5
Press HOME MENU to exit the menu.
NOTE
• If you select "Auto", the selection for "Drive Mode" (page 33)
becomes ineffective.
then ENTER).
then ENTER).

Sleep Timer

When the selected time elapses, the Sleep Timer automatically
places the system into the standby mode.
1
Press HOME MENU.
2
Select "Sleep Timer" ( /
3
Select the desired time ( /
• You can select from among "Off" (cancel), "30 min", "60
min", "90 min", and "120 min".
4
Press HOME MENU to exit the menu.
NOTE
• Five minutes before the selected time elapses, the remaining
time appears every minute.
• To check the remaining time, perform steps 1 and 2. After
checking the time, press HOME MENU to restore the
previous display.
• The SLEEP indicator on the front of the Plasma Display lights
up in orange when the Sleep Timer is set.

Using a password

The Plasma Display System provides the Child Lock function
for preventing children from watching inappropriate
programmes. You need to enter a password when watching
programmes with "Block" specified. Before the system is
shipped, "1234" is preset as the factory-default password. You
can however, change the password as you want.
When using the Home menu you select "Auto Installation",
"Analogue TV Setup", or "Password", a screen prompting
password entry appears to prevent others from changing the
programme settings at their choices.

Entering a password

In a case where you select a channel blocked with Child Lock
or password entry is requested when attempting to open the
menu, enter a password correctly.
1
Enter a correct 4-digit password using buttons 0 – 9.
Please Input Your Password.
NOTE
• If you fail password entry three times, "Invalid password."
appears, and the menu is closed. In order to display the
password entry screen again to unlock the password, select
the blocked channel or open the menu again.
• If the password entry screen disappears before entry, you
may recall it by pressing ENTER.
then ENTER).
then ENTER).
09
35
En