Selecting A Screen Size Manually; Selecting A Screen Size Automatically; Selecting A Screen Size For Received 4:3 Aspect Ratio Signals; Auto Size - Pioneer PDP-506FDE Bedienungsanleitung

Useful Adjustment Settings

Selecting a screen size manually

Press f to switch among the screen size options selectable
for the type of video signals currently received.
• Each time you press f, the selection is switched.
• The selectable screen sizes differ depending on the types of
input signals.
Item Description
4:3 For 4:3 "standard" pictures. A side mask appears on
each side.
FULL 14:9 For 14:9 squeeze pictures. A thin side mask appears on
each side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask appears on
each side, and you may also see bars on the top and
bottom with some programmes.
WIDE In this mode the picture is progressively stretched
toward each side of the screen.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on the top
and bottom with some programmes.
For 14:9 letterbox pictures. Bars may appear on the top
CINEMA
and bottom on some programmes.
CINEMA
ZOOM
FULL
NOTE
• While watching High Definition TV broadcasting, pressing
f switches among FULL, WIDE, 4:3, and ZOOM.
4:3
FULL 14:9
CINEMA14:9
WIDE

Selecting a screen size automatically

The Plasma Display automatically selects an appropriate
screen size when the received video signals contain WSS (wide
screen signaling) information or when video signals are
received from a connected HDMI equipment (see page 41). To
activate this function, use the following procedure.
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "Auto Size" ( /
4
Select "On" ( / then ENTER).

Auto Size

Off
On
Item Description
Off Deactivates the Auto Size function.
(factory default)
Activates the Auto Size function.
On
5
Press HOME MENU to exit the menu.
NOTE
• Manually select an appropriate screen size if an image does
not automatically switch to a correct screen format.
• When the video signal contains no aspect ratio information,
the function will not work even with "On" selected.
Selecting a screen size for received 4:3 aspect
ratio signals
Specify whether the Plasma Display should choose the 4:3
mode or WIDE mode when 4:3 aspect ratio signals are received
with the Auto Size function activated.
1
Press HOME MENU.
2
Select "Option" ( / then ENTER).
3
Select "4:3 Mode" ( / then ENTER).
4
Select "WIDE" or "4:3" ( /

4:3 Mode

WIDE
4:3
Item Description
Wide image without side masks.
WIDE
(factory default)
Keeps the 4:3 aspect ratio and presents side
4:3
masks.
WIDE
5
Press HOME MENU to exit the menu.
then ENTER).
then ENTER).
4:3
09
37
En