Changing The Door Hinges - hanseatic HGS8555CW Gebrauchsanleitung

Changing the door hinges

The door hinges are on the right upon delivery.
As changing the door hinges requires some
manual skills, please read through the steps
of the procedure beforehand. To change the
door hinges, you will need the following tools:
– Cross-head screwdriver
– 8 and 10 mm open-end wrench or socket
wrench
WARNING
Risk of electric shock!
To change the door hinges you will need
to remove the cover from the appliance.
Live parts can become accessible by do-
ing so.
Pull the mains plug out of the sock-
■
et before starting to change the door
hinges.
1. Pull out the blind plug from the top of the
door.
Changing the door hinges
2. Loosen both screw covers on the top of
the cover using a flat-head screwdriver.
3. Unscrew the two screws (on the left and
right) from the top of the cover. To do this,
use a cross-head screwdriver.
4. Lever out the two sides of the cover on
the front slightly and lift the cover up. In
doing so, ensure you do not damage the
temperature controller.
5. Unscrew the three fixing screws for the
hinge plate and the two screws on the
opposite side. To do this, use an 8 mm
spanner or a cross-head screwdriver.
Remove the hinge plate.
Page EN-23