Positioning The Freezer - hanseatic HGS8555CW Gebrauchsanleitung

16. Replace the door.
17. Screw the hinge plate tightly back onto
the opposite side. Make sure that the
hinge pin is in the hinge bushing of the
door.
The door will now function properly
again.
18. Screw both adjusting feet securely back
onto the freezer.
19. Carefully stand the freezer upright.
20. Reinsert the blind plug on the opposite
side of the door.
You have successfully changed the door
hinges.

Positioning the freezer

The freezer must stand on a level, solid sur-
face. For the best result, check the position
of the appliance with a spirit level. When you
open the door, the freezer should not move.
You can balance out unevenness in the sur-
face with the two front adjusting feet.
Changing the door hinges
1. Close the freezer door.
2. Tilt the freezer backwards slightly.
3. As required, turn the screw feet (3) inward
or outward.
4. Stand the freezer straight up once again
and check its alignment with a spirit level.
5. Repeat these steps until the freezer is
level.
Page EN-25