hanseatic HGS8555CW Gebrauchsanleitung Seite 54

Page EN-24 Changing the door hinges
6. Screw the hinge plate as well as the two
screws back onto the respective opposite
side.
7. Place the cover back on the freezer. Push
down on both sides (left and right) of the
front of the cover until you hear it click into
place.
8. Screw the two screws tightly back onto
the cover. To do this, use a cross-head
screwdriver. Secure the two screw cov-
ers.
9. Tip the freezer backwards (maximum
45°) so that you can also move the lower
door hinge.
10. Unscrew the two front screw feet (3).
11. Unscrew the lower hinge plate. To do
this, use an 8 mm spanner or a cross-
head screwdriver.
12. Remove the door.
13. Remove the plastic insert from the un-
derside of the door.
14. Insert the loose plastic insert supplied
into the new hinge stop side and firmly
screw in.
15. Turn the lower hinge plate. Loosen the
hinge bolts with a 10 mm spanner. Loos-
en the screws and reinsert the screws
and the hinge bolts from the other side.