Technical Description; Function Description; Control Elements - Dometic M70IP Montage- Und Bedienungsanleitung

PerfectView M70IP
6

Technical description

6.1

Function description

The LCD monitor is a monitor for the connection of cameras (e.g. reversing video systems) or other
video sources (e.g. DVD players). It is possible to switch back and forth between video sources.
The monitor features control cables which allow the cameras to be activated automatically.
The M70IP monitor can operate up to three cameras. Alongside manual controls and control using
control cables, the three cameras can be switched consecutively in automatic mode. The monitor
features a distance indicator in the display which is activated automatically when the reverse gear
is engaged.
The brightness of the monitor adapts automatically to the ambient light.
The M70IP monitor is equipped with a housing protected from water and also withstands water
jets in accordance with IP67.
The monitor can be operated using the control elements on the monitor and the infrared remote
control.
6.2

Control elements

Monitor
The following control elements are located on the monitor:
No. in
fig. 0,
Label
page 5
1
2
EN
Description
– Loudspeaker
S Switches between the video sources 1 to 3 (CAM1, CAM2 and
CAM3).
Closes the menu.
Technical description
13