Technical Description; Function Description; Control Elements - Dometic Waeco PerfectView M70IP Montage- Und Bedienungsanleitung

PerfectView M70IP
6

Technical description

6.1

Function description

The LCD monitor is a monitor for the connection of cameras (e.g. reversing video
systems) or other video sources (e.g. DVD players). It is possible to switch back and forth
between video sources.
The monitor features control cables which allow the cameras to be activated automati-
cally.
The M70IP monitor can operate up to three cameras. Alongside manual controls and con-
trol using control cables, the three cameras can be switched consecutively in automatic
mode. The monitor features a distance indicator in the display which is activated automat-
ically when the reverse gear is engaged.
The brightness of the monitor adapts automatically to the ambient light.
The M70IP monitor is equipped with a housing protected from water and also withstands
water jets in accordance with IP67.
The monitor can be operated using the control elements on the monitor and the infrared
remote control.
6.2

Control elements

Monitor
The following control elements are located on the monitor:
No. in
fig. 0,
Label
page 6
1
2
EN
Description
– Loudspeaker
S Switches between the video sources 1 to 3 (CAM1, CAM2
and CAM3).
Closes the menu.
Technical description
31