Hach KUNBUS-GW PROFINET TPS-1 Bedienungsanleitung Seite 5

Prepare the USB stick
1. Insert an empty USB stick in the PC.
2. Go to https://www.hach.com
profinet installation".
3. Download USB_ETHIP_PRNET.zip.
4. Unzip the file into the root directory of the USB stick.
Section 3 Start the USB configuration
Insert the prepared USB stick in the PC.
Step Description
1 Start start_usb_config.bat.
A terminal window opens.
Follow the step-by-step
guide.
2 Enter the IP address of the
RevPi module.
3 Enter the IP address of the
SC controller.
Make sure that the Network
prefix is the same as from
the RevPi module (e.g.,
192.168.0).
Make sure that the host
identifier is different to the
RevPi module (e.g.,
220 RevPi, 2 Controller).
4 Enter the Gateway type:
• pn—Profinet
• en—Ethernet/IP
and search for the keywords "usb ethernet/IP installation" or "usb
Picture
English 5