Hach KUNBUS-GW PROFINET TPS-1 Bedienungsanleitung Seite 207

Step Description
5 Confirm the settings with
Enter.
Remove the USB stick.
6 Insert the USB stick in the
left USB socket of the RevPi
Module.
7 LED description:
• A1/A2 orange: RevPi
installation starts.
• A1 red, A2 off: RevPi
insert USB stick.
• A1 green, A2 off: USB
stick inserted successfully.
• A1 off, A2 green: RevPi
downloads/uploads data
from USB stick.
• A3 red: RevPi reboots.
When A3 is red, remove the
USB stick.
8 The RevPi settings are
complete.
Section 4 Examples for installation
Figure 1 shows an installation with two different LAN connections.
Picture
Čeština 207