Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Message
Run LED flashes green.
Run LED flashes slowly
green.
Diag LED flashes red.
Diag LED flashes fast red. No connection to the controller. No
Diag LED is red.
L/A 1 or 2 LED is off.
L/A 1 or 2 LED flashes
green.
Description
Profinet controller is connected but
no data exchange.
Triggered by tool for identification
of the gateway component.
Triggered by tool for identification
of the gateway component.
Profinet name set in the module.
A Gateway device reports
diagnosis data.
No connection to a network.
Data exchange.
Solution
Wait until the next data
exchange.
Wait a few minutes.
Wait a few minutes.
Refer to
Configure the Profinet
Gateway
on page 219 to set the
name.
Refer to the diagnostic report.
Connect to network.
Wait until the data exchange is
complete.
Čeština 225
Werbung
