Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Section 9 Troubleshooting
9.1 Troubleshooting RevPi
Figure 4 RevPi Basic module
Message
LED A2 flashes
The communication has
red.
stopped.
LED A3 slowly
The configuration of the
flashes red.
Ethernet/IP and Profinet
Gateway is mixed up.
Description
Solution
• Connect the network cable (cable or router).
• Set the Modbus address setting in Claros to 1.
• Set the Modbus TCP in Claros menu to on.
Refer to
Start the USB configuration
step 4 and select the correct Gateway type:
• en – Ethernet/IP
• pn – Profinet
on page 5,
English 21
Werbung
