Technical Data; Noise/Vibration Information - Bosch EasyCut 50 Originalbetriebsanleitung

14 | English
(1) On/off switch
(2) Speed preselection thumbwheel
(AdvancedCut 50)
(3) Base plate
(4) Handle (insulated gripping surface)
(5) Auxiliary handle (insulated gripping surface)
(6) Locking lever of the saw blade receptacle cover
(7) Cover of the saw blade receptacle
(8) Saw blade
(9) 0° cut mark
(10) Viewing window for Cut Control
(11) 45° cut mark (AdvancedCut 50)
(12) Base for Cut Control
(13) Extraction outlet
(14) Wing bolt for mitre/bevel angle setting
(AdvancedCut 50)

Technical Data

All-purpose saw
Article number
Cut Control
Speed control
Speed preselection
Rated power input
Power output
A)
Max. cutting depth
– Without depth stop
– With depth stop A
– With depth stop B
– With depth stop A and B
Max. mitre/bevel angle (right)
Weight according to EPTA-Procedure 01:2014
Protection class
A) The resulting cutting depth is dependent on the saw blade used. The values stated here relate to the NanoBlade Wood Basic supplied.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 86 dB(A); sound power level
97 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑11:
Cutting boards with saw blade NanoBlade Wood Basic 50:
2 2
a = 2.5 m/s , K = 1.5 m/s .
h,B
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
1 609 92A 65Z | (25.11.2020)
(15) Scale for mitre/bevel angles (AdvancedCut 50)
(16) Saw blade receptacle
(17) Anti-splinter guard
a)b)
(18) Depth stop A
a)b)
(19) Depth stop B
(20) Hood for dust extraction
(21) Saw blade storage compartment in the guide rail ad-
a)
apter
a)
(22) Guide rail adapter
(23) Locking lever for guide rail adapter
a)
(24) Guide rail
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
b) Included in standard delivery with AdvancedCut 50.
EasyCut 50
3 603 CC8 0..
W 500
W 370
mm
mm
mm
mm
°
kg
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
a)
AdvancedCut 50
3 603 CC8 1..
● ●
● ●
– ●
500
370
50 50
36 36
22 22
6 6
45 45
1.6 1.7
/II /II
Bosch Power Tools