Operating The Lawn Mower; Setting The Cutting Height; Locking The Front Wheels - Stihl RMA 765 V Gebrauchsanleitung

English

12 Operating the Lawn Mower

12.1 Holding and Guiding the Lawn
Mower
► Hold the handlebar with both hands so that the
thumbs enclose the handlebar.
12.2

Setting the Cutting Height

Eight cutting heights can be set:
– 25 mm = position 1
– 35 mm = position 2
– 45 mm = position 3
– 55 mm = position 4
– 65 mm = position 5
– 75 mm = position 6
– 90 mm = position 7
– 100 mm = position 8
The positions are indicated on the lawn mower.
The cutting height is set individually at all wheels.
The setting must be the same for all wheels.
Setting the rear cutting height
► Pull lever (1) from the notch and moved to the
desired position.
32
12 Operating the Lawn Mower
Setting the front cutting height
► Hold wheel fork (1) with the hand.
The lawn mower cannot drop into the lowest
position under its own weight.
► Press release lever (2) in the direction of the
arrow and hold.
► Move axle (3) into the desired position.
► Release release lever (2).
Axle (3) engages.
12.3

Locking the Front Wheels

The front wheels can be locked for mowing on
slopes.
► Press button (1).
► Straighten front wheel (2) and allow to
engage.
► Lock the second front wheel too.
Releasing the lock
► Push release lever (1) in the direction of the
arrow.
0478-131-9938-C.VA2.M20.