Veromatic MBE01 Installation, Bedienung, Wartung Seite 61

6.6.2 Cleaning instant mixer
Turn off the machine.
1
Open the door of the machine.
2
Turn the spouts of the instant product canisters upwards and remove the product canisters from
3
the machine, starting with the left one (see 1-3).
Close the bean hopper by pressing the locking slide fully (a), tilt the hopper (b) and remove (c).
Clean the mixing system.
4
• Remove the hose from the outlet.
• Turn the mixer locking ring anti-clockwise to the unlock position.
• Pull the mixer house and the funnel forward so they detach from the mixer plate.
• Remove the mixer paddle from the mixer axis.
• Remove the mixer plate by turning it further clockwise and pulling it from the base.
• Clean all parts in a bucket with hot water, brush them clean and dry.
• Clean the exhaust channel.
• Replace all parts in the reverse order. When placing the mixer house and the funnel on the
mixer plate, remember to turn the mixer plate clockwise until you hear a click.
Clean the interior of the machine with a moist cloth.
5
Place the product canisters back into the machine and make sure the spouts point in the correct
6
direction.
To allow beans into the grinder, pull the locking slider towards you.
62
EN