Water Connection; Electrical Connection - Veromatic MBE01 Installation, Bedienung, Wartung

3.4

Water connection

Connection data water
Water connection
Water pressure
Water lock
Water filter
The machine must be placed within a distance of 1½ meters from an aerated washing machine tap on a
riser pipe, which relates to the current regulations of the water company and the above-mentioned
operating pressure.
The dispenser must be equipped with a flexible hose set (not supplied) that complies with the current
water and food regulations of the country. The hose must be equipped on the machine side with a gland
with seal. Whether the machine is new or a replacement, always use a new hose set for the water supply.
Do not reuse the old set for safety reasons.
Connection procedure
1. Attach the water hose to the tap.
2. Rinse the water supply thoroughly so possible dirt cannot enter the machine.
3. When using a water filter, follow the installation guideline of it's manual.
4. Attach the water hose to the inlet valve on the machine. Tighten the gland well.
5. Check to see if there are no kinks or damages on the hose.
6. Open the faucet.
7. Check for leakage.
3.5

Electrical connection

•
The machine must be connected with the supplied power cord.
•
It is required that a sufficiently fused socket outlet with proven grounding is present within 1½
meters.
•
Use a separate group, for this machine only, with a 16A fuse.
Electrical specifications
Power supply
Frequency
Electrical capacity
Electrical safety class
IP classification
Pollution grade
Overvoltage category
!
ATTENTION:
Allow the machine to acclimate. For that purpose, leave it at least half an hour standing on the
operation location, before plugging it in.
BSP
¾''
2.0 – 8.0
bar
0.2 – 0.8
MPa
Veromatic International BV instructs the use of a water lock (Veromatic
order code HL-00190) and does not accept any responsibility with
regard to water damage, in case the machine gets installed without this
water lock.
Install a water filter to ensure the best taste quality and to reduce scale
and thus maintenance. Replace the water filter regularly. See the water
filter specification for information. Your dealer can inform you about a
water filter and installment.
230 V~
50 Hz
2000 W
Class I
IP20
2
II
44
EN