Yard Force SA600H Originalanleitung Seite 46

PROGRAMMING
Input PIN code again and screen will succesfully unlocked by new PIN code.
5.10. Faults Record
When you find this robot stopped inside or outside the grassfield somewhere without
working any longer. You may press "STOP" button on top of the robot mower and find the
flashing symbols.
No signal
Lifted
Empty battery.
If above three symbol does not appear, there is a hot key to review the fault code and fault
happen time.
Press still and then press , it will display:
The left digits show the fault happen time. Right digits, circled by dots show the fault code.
44