Yard Force SA600H Originalanleitung Seite 58

20 EF8
21 EF9
22 EF10
23 E1
24 E3
25 E4
26 E20
27 E21/E22
28 E23
29 E24
TROUBLESHOOTING
Battery voltage is
Warning
too low to perform
message
normal mowing
Warning Drive motor
message maybe locked
Warning Cutting motor may
message be locked
Micro-controller
Fault
core self-check
message
fault
Cutting motor
stops in use, but
Fault it cannot stop
message when switched off
or cutting motor
overloaded.
Drive motor
Fault
cannot stop when
message
mower stops.
Boundary signal
Fault
self-checking
message
error
Micro-controller
Fault
self-checking
message
error
Driving motor
Fault
cannot turn when
message
mower is started
Cutting Driving
Fault motor cannot turn
message when mower is
started
1. Normally if voltage is low, the
mower should automatically
return to the charging station.
2. If not, please carry your mower
manually to charging station
when it has stopped on the lawn.
Power off then restart the mower.
If the fault still exists, please call
after sales service.
56