Yard Force SA600H Originalanleitung Seite 39

PROGRAMMING
to next number adjustment.
After setting settled, screen will automaticly quit date and time setting in 15 seconds, or
you may touch anywhere on the touch screen to finalize the date and time setting.
Note: only when the date and time setting correctly, will the robot work properly.
5.5.2 Set cutting weekday and time
Press on the touch screen on the weekday from "Mon" to "Sun" , the display reversely
display the working weekday with or without blank frame. When the blank frame appears,
means that weekday is prefered and seleced, robot will work on that day.
Press on the touch screen on the day time from "09:00-11:00" to "19:00-09:00" , the dis-
play reversely display the working daytime with or without blank frame. When the blank
frame appears, means that perioud is prefered and seleced, robot will work on that time.
Original factory setting is robot will work all weekday and 24 hours. We strongly recom-
mend user adjust the working weekday and working time from time to time.
Note: Customer have no chance to change the working day time
freely. We offered only 4 time perioud for option!
37