Leister MISTRAL PREMIUM Bedienungsanleitung Seite 32

Configuration set-up menu MISTRAL SYSTEM
Blower interface target
1× briefly
Controlled or regulated
1× briefly
Nozzle setting (see table)
1× briefly
Temperature offset +40°C / -40°C adjustable
1× briefly
Display Description
Temperature degrees Celsius
Temperature degrees Fahrenheit
Heating e-drive (potentiometer)
Heating interface target 0 – 10 V
Heating interface target 4 – 20 mA
Blower e-drive (potentiometer)
Blower interface target 0 – 10 V
32
Potentiometer
Closed loop
Without nozzle
to the right
1× briefly
0 – 10 volt
Middle nozzle
to the left
+40°C
Settings are saved. Return to opera-
ting mode.
Display Description
Blower interface target 4 – 20 mA
Closed loop regulated
Open loop controlled
Regulation parameter without nozzle
Regulation parameter middle nozzle
Regulation parameter small nozzle
Temperature offset settings + / -40 °C
Save
3 seconds
4 –20 mA
3 seconds
Open loop
3 seconds
Small nozzle
3 seconds
-40°C