Installation - Sharp R-3730 Bedienungsanleitung

R-3730 English
Use only the turntable and the roller stay designed
for this oven. Do not operate the oven without the
turntable.
To prevent the turntable from breaking:
(a) Before cleaning the turntable with water, leave
the turntable to cool.
(b) Do not put hot foods or hot utensils on a cold
turntable.
(c) Do not put cold foods or cold utensils on a hot
turntable.
Do not place anything on the outer cabinet during
operation.
1. Remove all packing materials from the inside of
the oven cavity. Discard the loose polythene
sheet from between the door and cavity. Remove
the feature sticker, if attached, from the outside of
the door.
Remove this film.
2. Check the oven carefully for any signs of damage.
3. Place the oven on a flat, level surface strong
enough to support the oven's weight plus the
heaviest item likely to be cooked.
Downloaded from: http://www.usersmanualguide.com/
22/06/2001 10:20 AM
IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION

Page 6
NOTE:
If you are unsure how to connect your oven, please
consult an authorised, qualified electrician.
Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
Water vapour or drops may occasionally form on
the oven walls or around the door seals and
sealing surfaces. This is a normal occurrence and is
not an indication of microwave leakage or a
malfunction.
4. Ensure there is a minimum of free space
above the oven of 19 cm.
5. Do not stack this oven.
6. Securely connect the plug of the oven to a
standard ear thed (grounded) household
electrical outlet.
6
19 cm