Sharp R-3730 Bedienungsanleitung Seite 17

R-3730 English
Notes:
• To select memory number 30, press the NUMBER keys 3 and 0, or simply press the NUMBER key 0.
• If you wish to change other preset memory programmes continually, press desired memory number key
prior to setting the STOP key. After selecting the memory number, follow the above example.
• The preset reduce factors of the memory banks are suitable for each cooking programme.
It is recommended to change it corresponding with new programmes you set.
4b. TO CHANGE THE REDUCE FACTORS
Example: Suppose you want to reduce the factor in MEMORY 23 (0.96) to 0.9.
1. Press the MEMORY key and hold for 5
seconds until the singal sounds twice.
MEMORY indicator light will come on.
4. Set the reduce factor.
Notes:
• To select memory number 30, press the NUMBER keys 3 and 0, or simply press the NUMBER key 0.
• The reduce factor can be set from 0.00 to 0.99.
• If you wish to change the reduce factor in other memories continually, press desired memory number key
prior to pressing the STOP key. After selecting the memory number, follow the above example.
Downloaded from: http://www.usersmanualguide.com/
22/06/2001 10:20 AM
8. Press the
MEMORY key.
x1
The reduce factors are preset for each memory programme separately, but you can alter the factor to suit
your needs.
For preset reduce factor, see page 8.
x1 and hold for
5 seconds
5. Press the
0
9
x1 x1
Page 15
OTHER CONVENIENT FUNCTIONS
9. Press the STOP key to release
the memory setting mode.
STOP
x1
2. Press the TIME
REDUCE key.
x1
6. Press the STOP key to release
MEMORY key.
x1
15
3. Select the MEMORY number. Press
the NUMBER 3 key to change the
flashing number 1.
3
x1
the memory setting mode.
STOP
x1