Cleaning And Maintenance; Technical Specifications - EuroLite Lava Lamp Bedienungsanleitung

Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for. Damages caused by non-observance are not subject to warranty.
Do only replace the lamps with 230 V/40 W E-14 lamps.
The lamp can reach temperatures of up to 120° C.
Procedure:
Step 1: Turn the glass-cylinder and take it from the base.
Step 2: Remove the old lamp from the lamp-socket.
Step 3: Put the new 230 V/40 W E-14 lamp into the lamp-socket.
Step 4: Replace the glass-cylinder on the base and turn it.

CLEANING AND MAINTENANCE

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fitting lamp:
Dimensions (DxH):
Weight:
Accessory:
R50 230V/40W E-14 reflectorlamp
Please note: All information is subject to change without prior notice. 02.07.2014 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state):
c
230 V AC, 50 Hz ~
40 W
25° C
max. 100° C
0.5 m
0.5 m
230V/40W E-14
115 x 410 mm
1 kg
No
No. 92034400
12/12 00084100, Version 1.0