3M PELTOR WS LiteCom Plus Serie Handbuch Seite 13

EN
Pairing mode can also be entered from the Sub-menu (fig.11).
See "configuring your headset". This could be used for pairing
a second device.
Make sure that Bluetooth communication is activated on your
®
Bluetooth device. Search and select "WS LiteCom Plus" on your
®
Bluetooth device. A voice message confirms when the pairing is
®
complete, "pairing complete" and "connected".
NOTE: You can always stop the pairing process by a long press
(2 s) on the Bluetooth button (fig.4).
®
NOTE: Only one of the two paired devices can be a two-way
radio. The headset only supports PTT over Bluetooth
two-way radio supports 3M™ PELTOR™ Push-To-Talk protocol.
If you have any questions, please contact your local distributor.
NOTE: When a third Bluetooth
one of the previously paired devices is removed from the
headset. If one of the devices is connected, the unconnected
device is removed. Otherwise, the first paired device is removed.
NOTE: By default, the radio VOX functionality is disabled when
taking a phone call via a Bluetooth
has ended, VOX is automatically activated. To transmit on the
two-way radio during a phone call, press the PTT button. If the
PTT button is pressed during a phone call, your voice will only
transmit through the two-way radio and not to the phone call.
*1:10 Reconnecting Bluetooth
When the headset is powered on, it tries to reconnect to all
paired device(s) during 5 minutes. A voice message will confirm
the connection, "connected".
NOTE: If the link is lost, a voice message will confirm with
"disconnected".
SMART TIP: If a Bluetooth
®
and the headset is on, press the Bluetooth
to all paired device(s) in the Bluetooth
will confirm the connection, "connected".
*1:11 Bluetooth function
®
Bluetooth is the name of a technical standard for short-
®
range wireless transmission, with a working range of
approximately 10 meters. This headset can be used with
other Bluetooth -enabled units that support any of the
®
profiles: headset (HSP), hands-free (HFP), or streaming
audio (A2DP).
• If the message "no paired devices" is heard, no Bluetooth
device is linked to the headset.
• If the message "connecting Bluetooth
heard, a Bluetooth -enabled device is linked to the
®
headset and connected.
• If the message "connecting Bluetooth
is heard, a Bluetooth device is linked to the headset, but
®
not connected.
5
if the
®
device is successfully paired,
®
connection. Once the call
®
devices
®
device(s) is paired but not connected
button to reconnect
®
range. A voice message
®
, connected" is
®
, connection failed"
®
* Only WS
*1:12 Answer a phone call
When the headset is connected to a phone via Bluetooth
wireless technology and there is an incoming call, answer
by short press (~0.5 seconds) the Bluetooth
*1:13 Reject a call
Press and hold (~2 seconds) the Bluetooth
reject a phone call.
*1:14 Toggle between phone and headset
When a call is active, it is possible to transfer the audio to
the phone instead of using the headset. Press (~2 seconds)
the Bluetooth button (fig.4). To return the call to the
®
headset, press (~2 seconds) the Bluetooth
more.
*1:15 End a phone call
To end an ongoing phone call, short press (~0.5 seconds)
the Bluetooth button (fig.4).
®
*1:16 Voice Dial
To enable voice dial, long press (~2 seconds) the Bluetooth
button (fig.4).
*1:17 Answer a phone call from the second paired phone
unit during an ongoing call
When a call is active, it is possible to answer an incoming
call from the second paired phone. Answer by a short press
(~0.5 seconds) on the Bluetooth
*1:18 Control Bluetooth
Play/pause streaming
Short press (~0.5 seconds) the Bluetooth
Skip to next track
Short press (2x~0.5 seconds) the Bluetooth
twice (fig.4).
Skip to previous track
Rapidly triple press (3x~0.5 seconds) the Bluetooth
(fig.4).
DID YOU KNOW: Audio playback will be automatically paused
from the audio playback unit when you have a call in progress or
two-way radio message. After ending the call / message, the
audio playback will automatically start again.
®
*1:19 Transmitting and receiving messages on a Bluetooth
connected two-way radio
Press the Bluetooth
®
to receive message.
*1:20 Adjust Bluetooth
Short press (~0.5 seconds) the [+] or [–] button to adjust the
volume on an active paired Bluetooth
(Bluetooth ) models
TM ®
button (fig.4).
®
button (fig.4) to
®
button once
®
button (fig.4).
®
streaming audio (A2DP)
®
button (fig.4).
®
button rapidly
®
button (fig.4) to transmit and release
volume (fig.3)
®
device.
®
®
®
button
®
®