Aux Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Silvercrest SBMS 30 A1 Bedienungs- Und Sicherheitshinweise

NOTE: Deleting the program: Press
twice . PRG CLR appears in the display .
˜ AUX operation
Ensure that the product is connected to the
audio device .
Press SOURCE 7 or AUX 21 to select
AUX mode .
Operate your audio device directly for
playback features .
Press VOL +/– 2 /43 to adjust the volume
to your desired level .
˜ Bluetooth operation
You can listen to music from a Bluetooth-enabled
device via this product .
˜ Pair Bluetooth-enabled
devices
The operational range between this product
and a Bluetooth device is approximately
8 metres (without any object between the
Bluetooth device and the product) .
Before you connect a Bluetooth device to
this product, ensure you know the device's
capabilities .
Compatibility with all Bluetooth devices is
not guaranteed .
Any obstacle between this product and a
Bluetooth device can reduce the operational
range .
If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically .
Press SOURCE 7 or BT 21 to select BT
(Bluetooth) mode . NO BT will show on the
display if the product is not paired to any
Bluetooth device .
Activate your Bluetooth device and select the
28
search mode . SBMS 30 A1 will appear on
your Bluetooth device . If you cannot find the
product, press PAIR 34 or press and hold
15 . The product enters pairing mode .
The display shows PAIRING .
Select SBMS 30 A1 in the pairing list . After
successful pairing: The display shows BT .
Play music from the connected device .
To disconnect the Bluetooth function,
you can:
Switch to another function on the product;
Disable the function from your Bluetooth
device . The Bluetooth device will be
disconnected from the product .
Press and hold
The Bluetooth device will be disconnected
from the product .
NOTES:
Enter 0000 for the password if necessary .
If a connection exist, press PAIR 34 or press
and hold
mode . The connection will be interrupted .
The display shows PAIRING .
If no other Bluetooth device pairs with
the product within 2 minutes, the product
recovers its previous connection .
The product also disconnects when your
device is moved beyond the operational
range .
15 or PAIR 34 .
15 to re-activate the pairing
GB/CY 19