SKY PARAGLIDERS SKYLIGHTER 4 M Bedienungsanleitung Seite 13

Connect the deployment handle to the side attachment loop
using a larks foot knot.
Thread the eyelets in sequence.
2
Insert the reserve with the handle attachment facing upwards
and the lines underneath.
5
Insert the pins into their colour coded loops and pull the rubber
pin retainer into position over the pin. Remove the threading
lines!
SKYLIGHTER 4
User manual / Handbuch
3
Using the lines provided (located in the rear pocket), thread the
eyelets in sequence.
6
Position the pins and the handle underneath the neoprene co-
ver. Secure the velcro tape and insert the final under surface
leaf of the container into its pocket.
4
7
13