Operation; Water Drainage - Qlima D 109 Gebrauchsanweisung

CONTROL LIGHTS ON THE CONTROL PANEL
This light indicates that the defrost function has been activated. This is necessary to
prevent excessive formation of ice in the device.
This light indicates that the water container is full. The device switches off
automatically.
The device is in operation when this light is on.

OPERATION

1 Ensure that the hygrostat is in the OFF position before inserting the plug into the wall
outlet.
2 Ensure that the water container has been positioned correctly. If the
on when you use the device for the first time, remove the water
from the device and replace it in the correct position.
3 Turn the hygrostat to the desired position. The hygrostat is continuously adjustable.
Set the hygrostat to 'NORMAL', which produces a relative humidity of approximately
50% and provides a comfortable living environment.
The device starts to dehumidify when the relative humidity in the room is higher than the
set value.
The device switches off automatically when the set value is reached, and restarts when the
humidity in the room rises again.
Setting the hygrostat to the 'MAX.' position keeps the device in continuous operation.
4 Turn the adjustment button to the 'OFF' position to turn the device off.

WATER DRAINAGE

When the water container is full, the
off automatically. Empty the container
will restart.
If desired, it is possible to connect a drainage hose to the device for permanent water
drainage. Follow these steps:
1 Unscrew the cap on the back.
2 Remove the rubber stop from the drainage spout.
-light switches on and the dehumidifier switches
and replace it in the correct position. The device
-light switches
c o n t a i n e r
4
59