Max CN238D Betriebsanleitung Seite 12

Adjustment dial
Deeper
Trigger lock dial
Trigger
ADDITIONAL INSTRUCTIONS FOR CN238D COIL NAILER
Contact arm
Metal contact tip
DRIVING DEPTH ADJUSTMENT DIAL
WARNING:
ALWAYS disconnect air supply before adjustment dial.
q With air pressure set, drive nails into a representative material sample to determine
if adjustment is necessary.
w If adjustment is required, disconnect air supply.
e Refer to the mark on the contact arm for direction to turn the adjustment dial.
r Reconnect air supply.
Shallow
TRIGGER LOCK MECHANISM
The tool is equipped with a trigger lock mechanism. Push and rotate the trigger LOCK
to the trigger UNLOCK position before driving nails.
HOW TO REMOVE PLASTIC SHEET
As nails are driven the plastic sheet will feed out of the tool. When sufficient strip has
been fed out it can be torn away by pulling against the tear edge in the nose.
METAL CONTACT TIP FOR FLOORING APPLICATION
CONTACT TIP REPLACEMENT
WARNING:
ALWAYS disconnect air supply before attaching / detaching the contact tip.
Deeper
12
Shallow