Time Program; Display - STIEBEL ELTRON VRL-C 300 G Premium Original Manual

oPeRATIoN
settings
4.7

Time program

The "Time program" menu contains menus which you can use to
set the switching times for the unit.
4.7.1 Date/Time
In the "Date/Time" menu, you can set the current date and the
time. The date and time adjust automatically for the summer/win-
ter daylight saving time switchover. The "Summer" and "Winter"
symbols in the default display tell you whether the unit is working
on summer or winter time. If there is a power failure, the back-up
battery in the controller saves the current date.
4.7.2 Time base
For the time programs, each 24-hour day is divided into blocks
of time. In the "Timing" menu, you can choose between three
timings. The "Timing options" table shows the three possible time
bases and the associated blocks of time.
In the "Day program" menu, you can specify the fan stage for each
block of time in the day.
Note
You can only select one time base. The selected time base
applies to all four day programs P1 to P4. We recommend
time base 2.
Time base 1 allows you to assign fan stages to 1.5 hour blocks
of time.
Time base 2 provides 1-hour blocks of time between 06:00 and
22:00, one setting for 22:00 to 24:00 and one setting for 0:00 to
06:00.
Time base 3 provides 1-hour blocks of time between 08:00 and
22:00, one setting for 22:00 to 24:00, one setting for 0:00 to 04:00
and 2-hour blocks between 04:00 and 08:00.
4.7.3 Day program
In the "Day program" menu, you can set the day programs P1 to P4.
You can choose between the day programs and assign individual
settings for each one. A fifth day program is also available; fan
stage 0 is always set for this program.
The display shows you which day program is currently called up
and which time base is selected.
f Select one of the 5 fan stages for each block of time. f
The fan stages are shown as horizontal lines. Fan stage I is rep-
resented by one horizontal line. Fan stages II, III and IV are re-
spectively represented by two, three and four horizontal lines
arranged one above the other. The display for fan stage 0 does
not have a horizontal line.
Timing options
Time base 1 0 ...
Time 0:00 1:30
Time base 2 ... 6 ...
Time 0:00 6:00 7:00
Time base 3 ... 4 ...
Time 0:00 4:00 6:00
22 | VRL-C 300/625/870
3 ... 6 ... 9
3:00 4:30 6:00 7:30 9:00
... 9 ... ... 12
8:00 9:00 10:00 11:00 12:00
8 ... 10 ... 12
8:00 9:00 10:00 11:00 12:00
Example:
Time base: ... 4 ... 8 ... 10 ... 12 ... 14 ... 16 ... 18 ... 20 ... 22
P1:
In the example, the unit is running in "Auto" mode, as follows:
Time
0:00 - 8:00
8:00 - 19:00
19:00 - 21:00
21:00-0:00
The unit is delivered with pre-defined standard settings. Adjust
these settings if required.
4.7.4 Seven-day program
In the "Seven-day program", you can set a day program for each
individual day of the week.
The "Program overview" shows the days of the week. Below the
days of the week is where you set the day program (P1, P2, P3,
P4, P5) for each individual day.
The unit is delivered with pre-defined standard settings. Adjust
these settings if required.
4.8

Display

In the "Display" menu, you can set how long the lighting is acti-
vated for. By setting passwords, you can protect the programming
level and Explorer from unauthorised access.
4.8.1 Lighting
In the "Lighting" menu, you can switch the lighting on or off man-
ually.
Under "Auto", you can specify a time after which the lighting
switches off automatically. To activate this function, the value in
the "Manual" line must be set to "On".
Under "DefaultDisp", you can specify a time after which the default
display is shown again if no button has been pressed.
4.8.2 Program
To protect the settings from unauthorised persons, you can assign
a password in the "Program" menu.
You can define a lock time for "tSchutz". After the wrong password
has been entered three times, this lock time must then elapse
before a password can be entered again. To activate this function,
the value in the "Actve" line must be set to "Yes".
Note
Make a note of your password and store it safely. If you
forget your password, please contact customer support.
... 12 ... 15 ...
10:30 12:00 13:30 15:00 16:30
... ... 15 ... ...
13:00 14:00 15:00 16:00 17:00
... 14 ... 16 ...
13:00 14:00 15:00 16:00 17:00
stage
18 ... 21 ... 24
18:00 19:30 21:00 22:30
18 ... ... 21 ...
18:00 19:00 20:00 21:00 22:00
18 ... 20 ... 22
18:00 19:00 20:00 21:00 22:00
www.stiebel-eltron.com
I
IV
II
0