Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WATER DRAINAGE
When the drainage tank is full, the tank full indicator light will turn on, the operation will
stop automatically and the buzzer will beep 15 times to alert the user, that the water need
to be emptied from the drainage tank.
EMPTY TANK
1.
Gently press on the sides of the tank and pull the tank out with both hands.
2.
Empty the water in the tank.
CAUTION
1.
Do not remove the floater in the water tank, otherwise, the water sensor will not
be able to sense the water level so that it can not operate normally.
2.
If the tank is dirty, use cold water or warm water cleaning. It is not possible to use
detergents, steel velvet, chemical treated dusting cloth, gasoline, benzene, thinner
or other solvents, because it may damage the water tank and cause water leakage.
3.
When putting into the tank, press the tank tightly with both hands. If the water
tank is not placed, the full water sensor will still be activated, and the dehumidi-
fier will not work.
4
88
Werbung
Inhaltsverzeichnis
Fehlerbehebung
