Troubleshooting - Unold 58915 Bedienungsanleitung

DE

TROUBLESHOOTING

EN
Problem
FR
The appliance cannot
be switched on.
NL
IT
ES
PL
The appliance shows
the error code E05.
The appliance shows
the error code E02.
The appliance shows
the error code E06.
32 von 90
Copyright UNOLD AG | www.unold.de
Solution
Ensure that the appliance is plugged into an electri-
cal outlet.
Check whether the power cord is damaged. If the
power cord is damaged, for safety reasons do not
continue to operate the appliance. Have the appli-
ance inspected by our customer service organisa-
tion.
Check whether the appliance has been switched on
via the ON/OFF switch (keep the button depressed
for at least five seconds!).
Ensure that the water level is precisely between the
Minimum and Maximum mark. If not, switch off the
appliance and add water or remove some of the wa-
ter. Switch on the appliance again.
The digital thermostat is defective. Contact our cus-
tomer service department.
When sensor detects the presence of steam, water
or moisture in the appliance, the heating process
will be stopped. Switch off the device,place it at dry
and well-ventilated area for 48 hours before start up
Stand 10.3.2020