Maintenance - Mettler Toledo SPC Benutzerhandbuch

1 General
1.1 Intended use
Use the product only for weighing in accordance with this User Manual and only in combination with
•
accessories and peripheral devices recommended by METTLER TOLEDO.
The product is intended for indoor use in non-explosive atmospheres only.
•
Any other type of use and operation beyond the limits of technical specifications is considered as not
•
intended and might impair the systems protection.
1.2 This document
This document contains all information for the installation and configuration of the product. Installation has to
be performed by trained personnel under the control of the operating company.
Read this document carefully before use.
•
Keep this document for future reference.
•
Pass this document to any further owner or user of the product.
•
1.3 Further documents
In addition to this printed User Manual the following documents are available:
Data Sheet
•
Installation Manual (for trained personnel under the control of the operating company)
•
Reference Manual for the MT-SICS Command Set
•
Reference Manual for the Standard Automation Interface (SAI)
•
APW Handbook
•
These documents can be downloaded from:
http://www.mt.com/SPC
1.4 Cleaning
WARNING
Risk of electric shock
Disconnect the electronic unit from the power supply prior to cleaning and maintenance.
Ensure that no liquid comes into contact with the weighing system.
Do not open the weight sensor or the electronic unit. They contain no user-serviceable parts.
Prior to cleaning protect the weight sensor with the transport cover (6), refer to Fig. 1 and Fig. 5.
•
Clean the weighing pan (4) and the weight sensor housing (1) regularly with a damp cloth.
•
Clean the electronic unit (2) with a damp cloth, if needed.
•
For tougher dirt use a mild household cleaner.
•

1.5 Maintenance

To ensure that your weighing system remains reliable, accurate and functional for many years to come, the
individual components must be cleaned and maintained periodically as appropriate for the intensity of use and
the risk of contamination with debris. Ask your METTLER TOLEDO office about service packages.
The device cannot be repaired.
(–> Documentation)
3