Maintenance; Cleaning; Disposal - Mettler Toledo ICS4-Serie Kurzanleitung

5 Maintenance

Maintenance of the weighing terminal is limited to regular cleaning.

5.1 Cleaning

Cleaning of the ICS4_5 / ICS685 (dry environments)
Take off the load plate and remove any dirt and foreign substances which may have collected underneath.
Do not use any hard objects to prevent scratching the surface.
Remove any remaining detergent with a wet cloth.
Observe all existing regulations on cleaning intervals and permissible cleaning agents.
Cleaning of the ICS4_9 / ICS689 (wet environments)
These devices are designed to be used in a wet environment. Depending on the environment and the cleaning
procedures, we suggest appropriate weighing platforms with different types of load cells. For a detailed
overview of recommended environments and suitable cleaning procedures, refer to the User manual.
Take off the load plate and remove any dirt and foreign substances which may have collected underneath.
Do not use any hard objects to prevent scratching the surface.
Remove any remaining detergent by rinsing with clear water.
To prolong the lifetime of the load cell, dry it with a soft lint-free cloth immediately after cleaning.
Observe all existing regulations on cleaning intervals and permissible cleaning agents.

5.2 Disposal

In accordance with the requirements of European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE), this device may not be disposed of with
domestic refuse. This also applies for countries outside the EU in accordance with
their respective national regulations.
Please dispose of this product in accordance with local regulations for the
separate collection of waste electrical and electronic equipment.
Should you have any questions, please contact the corresponding authorities or the dealer from whom this
device was purchased.
If this device is passed on (for example for further private or commercial/industrial use), this regulation is also
to be passed on.
Many thanks for your contribution to the protection of the environment.
Battery disposal
Batteries contain heavy metals and therefore must not be disposed of in the normal refuse.
Observe local regulations on the disposal of materials that are hazardous to the environment.
ICS4__ / ICS68_
WARNING
Risk of electric shock
1 Before cleaning, unplug the power plug in order to disconnect the terminal from the
power supply.
2 Cover open connectors with protective caps.
Maintenance​ ​ 19