F5 - Maintenance Menu; End - Exit Menu - Mettler Toledo ICS226 Bedienungsanleitung

4.6 F5 – Maintenance menu
4.6.1 F5.1 – Keyboard test
4.6.2 F5.2 – Display test
4.6.3 F5.3 – Display expand resolution
4.6.4 F5.10 – Reset F5 parameters to factory settings
4.7 End – Exit menu
30232252A ICS226
All manuals and user guides at all-guides.com
Factory settings are printed in bold characters.
9 The scale shows PrESS.
➜ Press all the keys to go through the test.
Note: If the keypad test fails, switch off the scale to quit the test. Contact your authorized
METTLER TOLEDO Service.
All the icons and segments light up.
Note: If the display test fails, switch off the scale to quit the test. Contact your authorized
METTLER TOLEDO Service.
Expand display resolution to 100,000.
Factory setting Off
Possible settings On
Note: For approved scales this function may be blocked by national W&M regulations.
Resets all parameters to factory settings except W&M setting.
1. Press .
StoreE? appears.
2. Press again to save changes.
– or –
➜ Press to reject changes.
17
Settings in the menu