INSTALLATION INSTRUCTIONS
Gas hob
Free space required around the appliance
Installing the appliance and making connections
GB38
A gas hob generates heat. Therefore, leave sufficient space between the
appliance and non-heat-resistant materials. Also be careful with materials
that may discolour (e.g. stainless steel).
min 650 mm
min 450 mm
min 100 mm
The hob may only be built in next to one vertical wall.
Attention
The bottom side of the hob becomes hot. Therefore, do not put anything
combustible in a drawer that has been fitted directly underneath the hob.
Place the appliance in the worktop and attach it using the mounting
brackets and screws.
Connect to the gas supply.
Check the connection for gas leaks using soapy water.
Connect the appliance to the mains.
number of modulos x 330 mm
building in
min 100 mm