Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION INSTRUCTIONS
Induction hob
5. Turn the hob over and place it in the cut-out.
6. Attach the hob using the mounting brackets supplied.
7. Connect the appliance to the mains. A short bleep will be
Directly after switching on the hob, the fan will activate briefly. The
hob will perform a self-test. This will take a few seconds.
For worktops up to 40 mm in thickness, place filler blocks
between the brackets and the worktop. The screws
should be screwed into the threaded holes.
heard and the displays will light up briefly.
The hob is now ready for use.
building in
GB45
Werbung
Inhaltsverzeichnis
