INSTALLATION INSTRUCTIONS
Gas hob
Preparing the hob
GB34
1/2" ISO (straight)
1/2" ISO (straight)
Sealing ring
the appliance's gas connection.
A
Remove the protective foil of the sealing strip (A) and tape the strip in the
groove of the aluminium profiles or on the edge of the glass plate. Do not
tape the sealing strip along the corner. Instead, cut 4 pieces that fit tightly
together in the corners.
1/2" ISO 228
(conical)
Sealing ring
1/2" ISO 228
(straight)
Fit the elbow supplied to
building in
only for France