Service Menu (Service) - Cameo OPUS X PROFILE Serie Bedienungsanleitung

Info
Service

SERVICE MENU (Service)

Quicklight
Starting from the main display, press the rotary-push encoder to enter the main menu. Select Service by turning the encoder and press the
Help
encoder to confirm.
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
------------------- Menu ------------------
This takes you to the Service menu, see table:
Control
Service
Settings
Select by turning, confirm by pressing, select command by turning, confirm by pressing. Back with BACK.
Info
Default values
Service
Quicklight
Help
------------------- Menu ------------------
Reset
Control
Settings
Info
Test
Service
Quicklight
Help
LED Calibration
Reset Service
Runtime
USB Update
Password
18
Fan Speed
Runtime
MAC
RDM-UID
Show DMX Values
Error Info
DMX Table
----------------- Service ----------------
Default Values
Reset
Test
LED Calibration
Reset Service Runtime
USB Update
Password
--------------- Quicklight --------------
Pan
Tilt
Dimmer
Factory Resets to factory setting
Zoom
Focus
User A Resets to User A values (save user values: Settings -> Set def. values)
User B Resets to User B values (save user values: Settings -> Set def. values)
User C Resets to User C values (save user values: Settings -> Set def. values)
------------------ Help --------------------
All Resets all motors
Pan / Tilt Shortcuts Resets pan / tilt motors
Turn encoder in the home screen
Head Resets motors in the device head
to change the DMX address
Sequence Pre-programmed sequence to test all components
Push & turn right to jump to the
latest selected menu point
Stress Test Pre-programmed sequence to test all components under maximum load
Push BACK for 3 seconds to jump to
Segment Tests LED segments
the home screen without saving
Run Motor Activate all motors individually with values of 000 to 255
000–100 Sets maximum brightness
No Do not reset service operation time
Yes Reset service operation time
No Do not run firmware update via USB interface
Yes Run firmware update via USB interface
For service purposes only
Auto
0020 h
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
------------------ Help --------------------
Touchscreen
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
Back Enter
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
Cameo
Opus X