Quicklight; Help (Help Menu) - Cameo OPUS X PROFILE Serie Bedienungsanleitung

Control
Control
Settings
Settings
Info Info

QUICKLIGHT

Service
Service
Quicklight
Set up a scene quickly and easily using the basic Moving Head functions without an external controller. Starting from the main display, press
Quicklight
the rotary-push encoder to enter the main menu. Select Quicklight by turning the encoder and press the encoder to confirm. Now select
Help
the desired menu item again by turning the encoder, pressing the encoder and setting the value from 000 to 255 as desired (change value
Help
by turning, confirm by pressing, back with BACK).
------------------- Menu ------------------
Control
------------------- Menu ------------------
Settings
Control
Info
Settings
Service
Quicklight
Info
Help
Service
------------------- Menu ------------------
Quicklight
Control
Help
Settings
Info
------------------- Menu ------------------
Service
If the Quicklight mode is activated, the display does not automatically change to the main display; when leaving the Quicklight menu, Quicklight
Control
Quicklight
mode is automatically terminated. The settings in the Quicklight menu are retained until the next restart of the spotlight; as a result,
Help
Settings
Quicklight can be accessed repeatedly with the same settings as long as the spotlight remains switched on. After restart, the values in the
Quicklight settings are reset (PAN = 127, TILT = 127, DIMMER = 000, ZOOM = 127, FOCUS = 127).
Info
------------------- Menu ------------------
Service Control
Settings
Quicklight

HELP (Help menu)

Info
Help
In the Help menu you will find three pages with 1. Information on quick commands that take you directly to specific menu items, 2.
Service
Information on the division of the display into control panels in the main menu and sub-menus, and 3. Information about the device itself.
Quicklight
Starting from the main display, press the rotary-push encoder to enter the main menu. Select Help by turning the encoder and press the
Help
encoder to confirm. Select the desired information again by turning the encoder.
------------------- Menu ------------------
Control
Settings
Info
Service
Quicklight
Help
Default Values
Control Setup
Reset
Settings
Test
Info
Reverse
LED Calibration
Backlight
Service
Reset Service Runtime
Quicklight
USB Update
Help
Password
------------------- Menu ------------------
-------------------- Info -------------------
Control
Firmware
--------------- Quicklight --------------
Temperature
Settings
Fan Speed
Info
Runtime
Pan
MAC
Service
Tilt
RDM-UID
Quicklight
Show DMX Values
Dimmer
Error Info
Help
Zoom
DMX Table
Focus
------------------- Menu ------------------
----------------- Service ----------------
Control Default Values
Reset
Settings
Test
Info
LED Calibration
------------------ Help --------------------
Service
Reset Service Runtime
Quicklight
USB Update
Shortcuts
Help Password
Turn encoder in the home screen
to change the DMX address
------------------- Menu ------------------
--------------- Quicklight --------------
Push & turn right to jump to the
Control
latest selected menu point
Pan
Settings
Tilt
Push BACK for 3 seconds to jump to
Info
the home screen without saving
Dimmer
Service Zoom
Focus
Quicklight
Help
------------------ Help --------------------
Shortcuts
Turn encoder in the home screen
to change the DMX address
Push & turn right to jump to the
latest selected menu point
Push BACK for 3 seconds to jump to
the home screen without saving
Display Firmware Setup
Temperature
Fan Speed
Display
Runtime
Reverse
Dimmer
MAC
Backlight
Motor
RDM-UID
Opera.
Show DMX Values
Misc
Error Info
DMX Table
----------------- Service ----------------
Default Values
V1.x.x
035°C
Reset
Auto
Test
0020 h
000 - 255
LED Calibration
000 - 255
Reset Service Runtime
USB Update
000 - 255
Password
000 - 255
000 - 255
--------------- Quicklight --------------
Pan
Tilt
Dimmer
------------------ Help --------------------
Zoom
Focus
Touchscreen
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
------------------ Help --------------------
Shortcuts
000 - 255
Turn encoder in the home screen
000 - 255
to change the DMX address
Back
000 - 255
Push & turn right to jump to the
000 - 255
latest selected menu point
000 - 255
Push BACK for 3 seconds to jump to
the home screen without saving
------------------ Help --------------------
Touchscreen
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
navigating
Back Enter
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
Cameo
Opus X
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
V1.x.x Display
035°C
Auto
0020 h
Auto
Off
000 - 255
000 - 255
000 - 255
000 - 255
000 - 255
------------------ Help --------------------
Touchscreen
In home screen: Press left upper corner to jump
into main menu or symbols for appropriate point
In menu: Each area works as button for
Enter
navigating
Back Enter
Cameo
Opus X
Cameo
Opus X
Cameo® is a brand of the Adam Hall Group
www.adamhall.com
19