Cameo OPUS X PROFILE GOBOS Bedienungsanleitung

USERS MANUAL
OPUS X PROFILE GOBOS
®
HIGH-POWER PROFILE MOVING HEAD - GOBO
IMPORTANT INFO!
In-depth technical knowledge is required to replace the gobos. Only specially trained persons may do this! If you do not have these qualifications, do not attempt to replace them yourself;
instead, contact a professional company!
Exercise extreme caution when replacing gobos, making sure not to damage the device or any corresponding parts/components. The manufacturer is not liable for any damage caused by
improper handling.
Disconnect all poles of the spotlight from the power supply before replacing the gobos (unplug the power cable)!
GOBO WHEEL 1, ROTATING GOBOS
Gobo 1 Gobo 2
GOBO HOLDER FOR ROTATING GOBOS
Holding spring
Gobo
Gobo holder
GOBO WHEEL 2, FIXED GOBOS
Gobo 1 Gobo 2
GOBO HOLDER FOR FIXED GOBOS
Holding spring
Gobo
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_CAMEO.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-HAll-Str. 1,
61267 Neu Anspach / Email Info@adamhall.com / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT) (Valid in the European Union and other European
countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to promote sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal
Gobo 3 Gobo 4
TECHNICAL SPECIFICATIONS FOR GOBO WHEEL 1
Product type:
Outside diameter:
Motif diameter:
Material:
Material thickness
(gobo 1–5):
Material thickness
(gobo 6):
Heat resistance:
Reflection factor:
Gobo 3 Gobo 4
TECHNICAL SPECIFICATIONS FOR GOBO WHEEL 2
Product type:
Outside diameter:
Motif diameter:
Material:
Material thickness:
Heat resistance:
Reflection factor:
Gobo holder
Cameo ® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
Gobo 5 Gobo 6
Rotating gobos for CLOXP
1.18 inches
0.98 inches
Borosilicate glass
0.04 inches
0.09 inches
400–450°C
>95% (450–650 nm)
Gobo 5 Gobo 6
Fixed gobos for CLOXP
1.18 inches
0.98 inches (ring gobo: 0.91 inches)
Borosilicate glass
0.04 inches
400–450°C
>95% (450–650 nm)
PROPER GOBO ALIGNMENT
When replacing the gobos, make sure that they
are inserted correctly into the corresponding
gobo holder. Otherwise, heat may damage the
gobos and gobo holders. The proper alignment
of the gobos is provided in the following illust-
rations and descriptions. However, if you have
any doubts about the alignment of a particular
type of gobo, please contact the appropriate
gobo manufacturer.
COATED GOBO GLASS
Insert coated glass gobos in the respective
gobo holders with the gobo's more reflective
side facing towards the light source. The less
reflective side of the gobo will thus absorb
less heat.
METAL GOBOS WITH TEXT OR SYMBOLS
Gobo 7
Gobos with a defined direction (e.g., text
gobos) are properly displayed in the projection
if they are correctly displayed from the side
facing the light source.
GLASS GOBO WITH TEXTURED SURFACE
Glass gobos with a textured surface are
generally aligned with the textured side facing
the light source. In this case, a heat-resistant
special adhesive is usually used to adhere
the gobo to the gobo holder since the uneven
surface prevents the gobo from being securely
installed with a holding spring.