Recording Interval Setting - TFA 30.3039.IT Gebrauchsanweisung

Transmitter search for a certain channel

Press + or - button during CH 1-8 appears in the display.

You can select now any channel.

The chosen channel number starts flashing.

After the desired channel is selected, CH x appears on the
display.

---- appears on the display if no transmitter is found, or the
serial number of a transmitter appears if a transmitter is
already entered on that channel.

Press the OK/MAX/MIN button to start a transmitter search
for that channel.

LEARNING and the channel numbers appear on the display
with a black bar.

The KlimaLogg Pro searches for transmitter signals for three
minutes.
Delete transmitter:

Press HIST/DEL button during CH1-8 appears in the display.

All entered transmitters will be deleted.

DELETED appears in the display.

You can also delete single transmitters with the HIST/DEL
button.

RECORDING INTERVAL SETTING:


Press SET button twice in normal mode.

INTERVAL appears on the text display.

The recording interval indication next to symbol REC starts
flashing.

Default interval 0:15 HR:MIN correspond 15 minutes.
The "+" or the "-" button allows you to select the recording

intervals listed below:
1 min, 5 min, 10 min, 15 min, 30 min, 1 hr, 2 hrs, 3 hrs und 6 hrs
This function allows you to set the interval in which the KlimaLogg Pro
records the data sets. The KlimaLogg Pro automatically creates a data
set in the corresponding interval. A data record is a snapshot of all
temperature and humidity values of all channels as well as the current
Note:
time and date.
40